BSD-3918 Phosphate Ester Amine Salt EP Anti-Wear & Anti-Corrosion Additive

Product Overview
BSD-3918, based on phosphate ester amine salt, is designed to provide comprehensive protection against wear and corrosion in industrial lubricants. Its advanced phosphorus-nitrogen composition enhances the oil’s lubricating performance, reduces frictional heat, and helps prevent wear and corrosion, extending the life of machinery and reducing maintenance needs.

Key Features

• Phosphate ester amine salt strengthens extreme pressure (EP) performance, preventing wear

• Provides long-lasting anti-corrosion protection, extending equipment life

• Synergistic with sulfur-based anti-wear agents for enhanced protection

• Excellent solubility, compatible with a wide range of base oils

Recommended Dosage

• Gear oil: 0.2-1.0%

• Lubricating grease: 0.5-1.0%

• Hydraulic oil: 0.2-0.5%

• Metalworking oil: 0.3-.5%

Product Appearance

Packaging and Acceptance

• This product is packaged in standard iron drums, or in BIC ton drums or other packaging forms according to customer needs.
• Product identification, sample retention, and delivery acceptance shall be carried out in accordance with SH/T0164 standard.

Product Storage, Transportation, and Compounding Agent Blending Operations and  Precautions

• The product shall be stored, loaded and unloaded in accordance with the SH/T0164 standard, and must be clearly labeled during transportation, storage and use to prevent mixing and cross contamination with other petroleum products.
• When adjusting oil, the maximum temperature should not exceed 75 ℃.
• Long term storage temperature should not exceed 50 ℃.
• Single dose and composite product shelf life: 24 months (at ambient temperature). After opening and using, pay attention to sealed storage.

Health and Safety

• The products in this manual are non flammable, non explosive, and non corrosive, and are similar to general petroleum products in terms of safety, environmental protection, and use.
• Avoid prolonged or repeated contact with the skin during use, prevent accidental ingestion, and keep away from children.
• Wear protective gloves when using, and the operator does not need to take special safety precautions. Once it splashes into the eyes or skin, rinse thoroughly with plenty of water.
• Store the product in a cool, dry, and well ventilated place, away from sources of fire. Heat source.
• Waste packaging materials, oil liquids, and waste residues should be handed over to qualified units for recycling and disposal, and are prohibited from being discharged into water bodies or soil.
• For other health and safety information, please refer to the Product Safety Data Sheet (MSDS).