API GL5 Flame Retardant Gear Oil Additive Package Extreme Pressure

BSD78661A

General gear oil additive package

BSD8661A is composed of various high-quality extreme pressure agents, antioxidants, flame retardants.

Metal deactivators, rust inhibitors, and other additives. The formulated oil has excellent properties

It has extreme pressure wear resistance, rust resistance, and corrosion resistance in applications,

And it can effectively protect the gear tooth surface from damage under harsh conditions.

It has excellent scratch resistance and sintering resistance, which can prevent sludge deposition.

Product Features

• Meet the requirements of high-speed impact load, low-speed, and high torque
• Wide anti-corrosion range
• Excellent sealing adaptability

Recommended dosage (weight percentage)

API GL-5 heavy-duty automotive gear oil 3.8%

API GL-4 Medium Load Automotive Gear Oil 1.9%

L-CKD heavy-duty industrial gear oil 1.3%

L-CKC medium load industrial gear oil 1.1%

Typical inspection

Test Methods for Project Standard Scope

Appearance: Light yellow transparent liquid. Visual inspection

Density, 20 ℃ kg/m3 1100.0-1100.0 GB/T1884

Kinematic viscosity, 100 ℃ mm2/s 2.0-6.0 GB/T265

Flash point (open circuit), ℃ ≥ 180 GB/T267

Nitrogen,% (m)≥0.45 SH/T0224

Sulfur content,% (m)≥26 SH/T0303

Phosphorus content,% (m)≥1.0 SH/T0296

Copper corrosion at 100 ℃ for 3h ≤ 1a GB/T5096

Four ball machine experiment

PB/N≥

PD/N≥

one thousand two hundred and eighty

four thousand

GB/T3142

Wear point diameter D/mm (392n, 60min) ≤ 0.35 SH/T0189

PS: 3.8% BSD78661A+96.2% base oil (40% 150BS+60% 500N)

Product Appearance

Packaging and Storage

200L metal drum packaging, stored in a dry, clean, and ventilated warehouse at a certain temperature

Long term temperature not exceeding 45 ℃. This product is non flammable, non explosive, and non corrosive.

It is equivalent to general petroleum products in terms of safety, environmental protection, and usage.

When using, avoid contact with strong oxidants. When in contact with the skin, rinse thoroughly with soapy water.

Product storage, transportation, and compounding agent blending operations and precautions
The product shall be stored, loaded and unloaded in accordance with the SH/T0164 standard, and must be

clearly labeled during transportation, storage and use to prevent mixing and cross contamination with other

petroleum products;
When adjusting oil, the maximum temperature should not exceed 75 ℃;
Long term storage temperature should not exceed 50 ℃.
Single dose and composite product shelf life: 24 months (at ambient temperature). After opening and using,

pay attention to sealed storage.

Health and Safety
The products in this manual are non flammable, non explosive, and non corrosive, and are similar to general

petroleum products in terms of safety, environmental protection, and use.
Avoid prolonged or repeated contact with the skin during use, prevent accidental ingestion, and keep away

from children.
Wear protective gloves when using, and the operator does not need to take special safety precautions. Once

it splashes into the eyes or skin, rinse thoroughly with plenty of water.
Store the product in a cool, dry, and well ventilated place, away from sources of fire. Heat source.
Waste packaging materials, oil liquids, and waste residues should be handed over to qualified units for recycling

and disposal, and are prohibited from being discharged into water bodies or soil.
For other health and safety information, please refer to the Product Safety Data Sheet (MSDS).