BSD-78662 Heavy-Duty Vehicle Gear Oil Compound Additive

Product Performance

BSD-78662 is a high-performance compound additive for heavy-duty vehicle gear oils. It is used in hypoid gear oils for rear axles and transmission oils. This product meets the GL-5 requirements of ASTM D7450-2013 and GB13895-2018. It provides excellent extreme pressure protection, thermal stability, and oxidation stability. Oils formulated with it help maintain long vehicle service life. It has passed the L-42, L-37, L-33-1, and L-60-1 bench tests conducted by the Southwest Research Institute in the USA.

Scope of Application and Recommended Dosage

Technical Parameter

Product Appearance

Packaging and Acceptance

• This product is packaged in standard iron drums, or in BIC ton drums or other packaging forms according to customer needs.
• Product identification, sample retention, and delivery acceptance shall be carried out in accordance with SH/T0164 standard.

Product Storage, Transportation, and Compounding Agent Blending Operations and Precautions

• The product shall be stored, loaded and unloaded in accordance with the SH/T0164 standard, and must be clearly labeled during transportation, storage and use to prevent mixing and cross contamination with other petroleum products;
• When adjusting oil, the maximum temperature should not exceed 75 ℃;
• Long term storage temperature should not exceed 50 ℃.
• Single dose and composite product shelf life: 24 months (at ambient temperature). After opening and using, pay attention to sealed storage.

Health and Safety

• The products in this manual are non flammable, non explosive, and non corrosive, and are similar to general petroleum products in terms of safety, environmental protection, and use.
• Avoid prolonged or repeated contact with the skin during use, prevent accidental ingestion, and keep away from children.
• Wear protective gloves when using, and the operator does not need to take special safety precautions. Once it splashes into the eyes or skin, rinse thoroughly with plenty of water.
• Store the product in a cool, dry, and well ventilated place, away from sources of fire. Heat source.
• Waste packaging materials, oil liquids, and waste residues should be handed over to qualified units for recycling and disposal, and are prohibited from being discharged into water bodies or soil.
• For other health and safety information, please refer to the Product Safety Data Sheet (MSDS).