BSD-68603 Dual-Fuel Engine Oil Compound Additive

Product Performance

This product is formulated with various high-grade detergent-dispersant additive and high-temperature ashless antioxidants. The addition of the low-ash detergent in this product can effectively avoid problems such as valve system wear, spark plug clogging and engine knock caused by excessive engine deposits. It has excellent high-temperature antioxidation performance. It can withstand the impact of the high temperature of the gas engine on the performance of the engine oil and maintain the stable operation state of the engine. Excellent dispersibility can effectively prevent the nitration of engine oil caused by exhaust gas NO_x, avoid the generation of oil sludge, effectively reduce the deposits at high and low temperature and keep engine components clean. The medium-ash formula has the ability to neutralize acids and maintain alkalinity.

Scope of Application and Recommended Dosage

It is suitable for formulating various types of high-output power and high-boost gas engine oils using LPG and CNG as single fuels, as well as engine oils for engines using LPG/CNG gasoline and LPG/CNG diesel as dual fuels.

Recommended dosage: LPG/CNG Gasoline engine oil: 7.0%; Diesel engine oil: 8.5%

Technical Parameter

Product Appearance

Packaging and acceptance

• This product is packaged in standard iron drums, or in BIC ton drums or other packaging forms according to customer needs.
• Product identification, sample retention, and delivery acceptance shall be carried out in accordance with SH/T0164 standard.

Product storage, transportation, and compounding agent blending operations and precautions

• The product shall be stored, loaded and unloaded in accordance with the SH/T0164 standard, and must be clearly labeled during transportation, storage and use to prevent mixing and cross contamination with other petroleum products.
• When adjusting oil, the maximum temperature should not exceed 75 ℃.
• Long term storage temperature should not exceed 50 ℃.
• Single dose and composite product shelf life: 24 months (at ambient temperature). After opening and using, pay attention to sealed storage.

Health and Safety

• The products in this manual are non flammable, non explosive, and non corrosive, and are similar to general petroleum products in terms of safety, environmental protection, and use.
• Avoid prolonged or repeated contact with the skin during use, prevent accidental ingestion, and keep away from children.
• Wear protective gloves when using, and the operator does not need to take special safety precautions. Once it splashes into the eyes or skin, rinse thoroughly with plenty of water.
• Store the product in a cool, dry, and well ventilated place, away from sources of fire. Heat source.
• Waste packaging materials, oil liquids, and waste residues should be handed over to qualified units for recycling and disposal, and are prohibited from being discharged into water bodies or soil.
• For other health and safety information, please refer to the Product Safety Data Sheet (MSDS).

Packaging and Storage

• 200L metal drum packaging, stored in a dry, clean and ventilated warehouse, storage temperature

• for a long time not more than 45 ℃.This product is not flammable, explosive and non-corrosive.

• It is equivalent to general petroleum products in terms of safety, environmental protection and use.

• For application, avoid contact with strong oxidizer.Rinse clean with soapy water when touching the skin.