BSD-68602 SM/SN Grade/A3/B4 Gasoline Engine Oil Additive Package

Product Composition

A compound of high-grade detergents, ashless dispersants, long-chain ZDDP, antioxidants, friction modifiers, and metal deactivators.

Product Performance

Provides outstanding anti-wear, friction reduction, restorative properties, and detergency. It extends component life, reduces emissions, and offers excellent fuel economy with long oil change intervals.

Product Application

Specifically formulated for ILSAC GF-series and API SM/SN standards. Used in API Group I-IV base oils to blend various grades of ACEA A3/B4 engine oils.

Recommended Dosage

SM: 7.5%; SN/CF-5: 7.8%; ACEA A3B4: 10.5% + 0.25% BSD-WT355.

Technical Parameter

Product Appearance

Packaging and Acceptance

• This product is packaged in standard iron drums, or in BIC ton drums or other packaging forms according to customer needs.

• Product identification, sample retention, and delivery acceptance shall be carried out in accordance with SH/T0164 standard.

Product Storage, Transportation, and Compounding Agent Blending Operations and Precautions

• The product shall be stored, loaded and unloaded in accordance with the SH/T0164 standard, and must be clearly labeled during transportation, storage and use to prevent mixing and cross contamination with other petroleum products.
• When adjusting oil, the maximum temperature should not exceed 75 ℃.
• Long term storage temperature should not exceed 50 ℃.
• Single dose and composite product shelf life: 24 months (at ambient temperature). After opening and using, pay attention to sealed storage.

Health and Safety

• The products in this manual are non flammable, non explosive, and non corrosive, and are similar to general petroleum products in terms of safety, environmental protection, and use.
• Avoid prolonged or repeated contact with the skin during use, prevent accidental ingestion, and keep away from children.
• Wear protective gloves when using, and the operator does not need to take special safety precautions. Once it splashes into the eyes or skin, rinse thoroughly with plenty of water.
• Store the product in a cool, dry, and well ventilated place, away from sources of fire. Heat source.
• Waste packaging materials, oil liquids, and waste residues should be handed over to qualified units for recycling and disposal, and are prohibited from being discharged into water bodies or soil.
• For other health and safety information, please refer to the Product Safety Data Sheet (MSDS).